Outdoor LED Flood Lights Wholesale Factory
Outdoor LED Flood Lights Wholesale Factory
Outdoor Lighting Wholesale Manufacturers
LED Flood Light LED Spotlight
Also known as the spotlight. Usually, it can aim in any direction and has structures that are not affected by climate conditions.
Mainly used for large-scale workshops, mines, building contours, stadiums, overpasses, monuments, parks, and flower beds. Therefore, almost all large area outdoor lighting can be regarded as a spotlight.
1. Composition and Performance Characteristics of Spotlight
B. Performance characteristics
A. Rotational symmetry
B. Two symmetries
C. A Symmetry
D. Asymmetric form
3 Installation of Spotlight
4 LED Spotlight
6 The scope of application and matters needing attention
LED floodlights is a point light source that can illuminate evenly in all directions. Its illumination range can be adjusted arbitrarily. It is shown as a regular octahedron in the scene.
- Basic information
- Product characteristics
- Technical parameters
- Working Principle
- Places of use
|CREE High Power LED (Customized Color Temperature for Users)|
|Beam angle||5-120 degrees (customizable for users) 5 degrees angle is the searchlight, can play more than 200 meters|
|Service life||≥30,000 Hours|
|Shell material||Metal Molding|
|Mask Material||High Definition Transparent Toughened Glass|
|Power||200W-300W (Power can be customized according to practical application)|
|Application place||Construction sites, aerial vehicles, plazas, parks, art venues, factory buildings, gymnasiums, golf courses, shops, subway platforms, gas stations, buildings, sculptures, green lighting and other places of lighting decoration.|
At low current, the temperature rise of LED floodlights is not obvious. If the ambient temperature is high, the main wavelength of the LED floodlights will be red-shifted, the brightness will decrease, and the uniformity and consistency of the luminescence will become worse. Especially, the temperature rise of lattice and a large display screen has a more significant influence on the reliability and stability of LED floodlights. So heat dissipation design is very important.
A LED floodlight illuminates objects evenly from a particular point in all directions. It’s best to use it to analogize bulbs and candles. The floodlights can be placed anywhere in the scene. For example, it can be placed outside the scope of a camera or inside an object. It is common to use many different colors of floodlights over long distances in scenes. These LED floodlights can cast shadows and mix them with models. Owing to the large illumination range of the floodlights, the illumination effect of the floodlights is very easy to predict, and there are many auxiliary uses for this kind of lights. For example, if the LED floodlights are placed near the surface of the object, the bright light will be produced on the surface of the object.
The following is an example of 30W floodlights:
Appearance structure: Aluminum alloy shell is formed at one time, and the surface is treated with anti-oxidation and anti-corrosion.
- Light flux: 3000-3300Lm
- Working Voltage: AC 85-265V
- Constant current module is used in the inner part. Constant current output is 930 mA and the voltage is 32V.
- Beams: (6 m) 3.3 m in diameter
- Illumination: (6 meters) 40 LUX
- Lighting source service life: more than 50,000 hours
- Circuit Service Life: Guarantee more than 3 years
- Material: Green and Environmental Protection High Pressure Die Casting Aluminum Alloy Lamp Shell
- Dust-proof and waterproof grade: IP65~IP68 Pu micro-respirator
- Efficiency > 90%
LED Floodlights is one of the most widely used light sources in rendering. Standard floodlights are used to illuminate the whole scene. Multiple floodlights can be used in the scene to produce better results. Floodlight is one of the most widely used light sources in effect maps. In scenes, many floodlights can coordinate to produce better results.
Hotel exterior wall, square night view, garden lighting, interior decoration, outdoor flooding
LED floodlights distinguishing feature
What are an LED floodlights? It is mainly used for building decorative lighting and commercial space lighting. Its decorative component is heavy. Its appearance is round and square. Because the reason for heat dissipation is usually considered, its shape is different from the traditional projection lamp.
LED floodlights are actually made up of LED cups. He has his own characteristics.
- High purity aluminum reflector and beam are the most precise and have the best reflection effect.
- Symmetrical narrow-angle, wide-angle and asymmetrical light distribution systems.
- Back-opening lamp replacement, easy to maintain.
- Light fixtures are equipped with calibration boards to adjust the irradiation angle conveniently.
Through the control of built-in microchip, the LED floodlights can be used without the controller in small engineering applications. It can achieve dynamic effects such as gradient, jump, color flicker, random flicker, gradient alternation, etc. It can also achieve chasing, scanning and other effects through the control of DMX. Its main application places are probably these: single buildings, historical buildings, exterior wall lighting, building interior light penetration lighting, indoor partial lighting, green landscape lighting, billboard lighting, medical and cultural lighting and other special facilities, bars, dance halls and other entertainment places atmosphere lighting and so on.